Roofing in Richmond, KY
Roof inspections, repairs, and replacements for asphalt shingle, standing seam, metal, and low-slope membrane roofing in Richmond.
A roof job starts with figuring out what is actually failing before anyone talks about tearing anything off. We get up there, check flashing at every chimney and pipe boot, look at the valleys, and check the attic from the inside for daylight, staining, or soft decking. Most of the leaks we find are not coming from where the water shows up inside the house, so tracing it back to the real failure point comes first.
When a roof is put on badly, the problems do not show up right away. Missing ice and water shield at the valleys, flashing tucked in the wrong order, nails driven too high or too low, all of it can sit fine for a year or two before a heavy rain finds the gap. By the time you see a stain on the ceiling, water has usually been getting into the decking for a while, and that is where rot and mold start.
Asphalt shingle covers most homes here and is the right call for most budgets. Standing seam and metal make sense on steep pitches or for anyone planning to stay in the house a long time. Low-slope membrane roofing systems handle porch roofs, additions, and anywhere water needs to be moved off a nearly level surface. Kentucky's freeze and thaw swings and summer storms mean the underlayment and attic ventilation matter just as much as whatever is on top.
Request a QuoteRoofing jobs, photographed by us.
-
Green metal roof estate
-
Green metal roof estate
-
White farmhouse reroof
-
White farmhouse reroof
-
Brick home with copper accents
-
Brick home with copper accents
-
Brick home with copper accents
-
Standing seam on a new build
-
Standing seam on a new build
-
Black Standing Seam Home Addition
-
Black Standing Seam Home Addition
-
Modern metal roof and wood siding
-
Modern metal roof and wood siding
-
Modern metal roof and wood siding
-
Modern metal roof and wood siding
-
Modern metal roof and wood siding
-
Brick colonial reroof
-
Brick colonial reroof
-
Brick colonial, green shutters
-
Brick colonial, green shutters
-
Brick home with skylights
-
Craftsman bungalow
-
Brick home with dormers
-
Brick home, steep roof
-
Ranch reroof
-
Ranch reroof
-
Country ranch, gray shingle roof
-
Country ranch, gray shingle roof
-
Country ranch, gray shingle roof
-
Cedar home reroof
-
Cedar home reroof
-
Cedar home reroof
-
Cedar home reroof
-
Cedar home reroof
-
Farmhouse reroof
-
Farmhouse reroof
-
Farmhouse reroof
-
Black Standing Seam Home Addition, Second Angle
-
Black Standing Seam Home Addition
-
Roof replacement in progress
-
Roof replacement in progress
-
Roof replacement in progress
-
Shingle detail
-
Shingle detail
-
Standing seam porch roof
-
Bungalow metal roof
-
Gray siding and shingle roof
-
Brick ranch
-
Commercial membrane roof
-
Historic building metal roof
How roofing work runs.
- 01
Inspection and diagnosis
We check the roof surface, flashing, and attic to find out what is actually wrong before recommending anything.
- 02
Tear off and deck check
Old roofing comes off and we check the decking underneath for rot or soft spots that need replacing.
- 03
Flashing and underlayment
New drip edge, flashing, and ice and water shield go down at every valley, eave, and penetration.
- 04
Roofing material install
Shingle, standing seam, metal, or membrane goes on according to the manufacturer's install pattern.
- 05
Ventilation and cleanup
Ridge and soffit vents are checked or added, and the yard gets swept for nails and debris.
- 06
Final walkthrough
We walk the roof and attic with you and point out what was found and fixed.
Roofing questions.
How do I know if I need a repair or a full replacement?
It comes down to the age of the roof, how widespread the damage is, and whether the decking underneath is still sound. A localized leak on a roof with plenty of life left is usually a repair. Wide granule loss, multiple layers already on the roof, or soft decking usually points to replacement.
What is the difference between asphalt shingle and standing seam metal?
Asphalt shingle costs less up front and works fine on most homes. Standing seam metal costs more but sheds snow and rain faster and holds up longer, especially on steep roofs. Metal expands and contracts more with heat, so the fastening system has to allow for that movement.
My roof is not that old, why is it leaking?
Most leaks on a newer roof trace back to flashing, not the shingles themselves. A pipe boot that has cracked, step flashing at a chimney, or a valley that was not lined properly are the usual culprits.
How often should a roof get inspected around here?
Once a year is reasonable, and definitely after any storm with high wind or hail. We check the shingles, flashing, and attic each time, since the attic often tells you more than the surface does.
Ask about roofing.
Every job starts with working out what is actually wrong. Send the details and we will set up a free walkthrough.
- Call or text(859) 200-1489
- Hours
Mon to Fri, 8am to 5pm
- Office
210 W Broadway Ave., Richmond, KY 40475